Featured
Use the StruSheets Wind Coefficient Calculator the same way as the original roof and wall effective-area workbook: span, tributary widths, enclosure and qh.
Read articleEngineering knowledge
Practical guides for detailers, PEB engineers and CAD teams. 90 published articles — written to be used on real jobs, not as doorway pages.
Featured
Use the StruSheets Wind Coefficient Calculator the same way as the original roof and wall effective-area workbook: span, tributary widths, enclosure and qh.
Read articleSTAAD.Pro
Calculate a STAAD.Pro steel take-off directly from STD or ANL nodes, member incidences, section assignments and the structural profile catalogue.
STAAD.Pro
Expand a STAAD MEMBER PROPERTY list so each member gets its own line, or compact split lines back into TO ranges — including BY steps and hyphen ranges.
STAAD.Pro
Convert STAAD LOAD COMB n cards into LOAD n COMB plus REPEAT LOAD for later STAAD versions — or reverse the conversion without touching unrelated lines.
STAAD.Pro
Pull Cb and Lp from a STAAD ANL TAPERED (AISC SECTIONS) design listing, then optionally check AISC equation F2-1 from quarter-point moments.
STAAD.Pro
Check TAPERED STAAD properties against the original mill min/max limits. Clear web depth is overall depth minus both flange thicknesses, and exact limit values still pass.
STAAD.Pro
Parse MEMBER END FORCES from a STAAD ANL listing, pick Start or End, and read the 12-row signed governing envelope used for connection design.
STAAD.Pro
Parse SUPPORT REACTIONS from a STAAD ANL file into a foundation table: node and load filters, 0–3 decimal rounding, and signed envelopes.
StruSheets
StruSheets is the StruTools name for the old Excel Programs library. Each app keeps yellow/unlocked spreadsheet inputs on the left and a live A4 calculation on the right.
STAAD.Pro
The seven office VB STAAD utilities now run in the browser: take-off, member lists, REPEAT LOAD, Cb, tapered mill checks, member end forces and support reactions.
Showing 9 of 89 articles · 9 per page